• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

Maverick Blackout belt drive system

RampageCrazy26cc

Senior Member
Messages
258
Location
,VA
Oh ok. Now I remember. Good to see ya on here. Dude I need a firecracker under my ass. I seemed to have lost interest in RC. My Rampage MT has been sitting a month. I need to see why my center diff is noisy. Plus parts everywhere lol. I am an auto mechanic so I get burned out working on stuff all the time.

i know that feeling, my tmaxx as been sitting on the shelf for 8 years or so, my rampage has been sitting for a bit. im trying to get it up and going again,
 

G-Man

Junior Member
Messages
958
Location
Pittsburgh,PA
So then I finally get off my ass and take two 5th scales out for a bit yesterday. Took the Dunerunner out. It broke. Stopped dead in its tracks and revved up without movement. So I suspected a broken drive belt. But it wouldn't roll at all. All four wheels locked up. So I get it home to find the belt did indeed break. But it jammed up between the brake shaft pulley and the belt cover locking the wheels. Come to find a little pebble down in a grubscrew hole on the clutch bell pulley. Think clear silicone is going in there now. Check this out hahahaha. 20191103_164702.jpg 20191103_164758.jpg
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
I had a grub screw come out and get jammed between the belt on the bottom pulley and the cover.
Got hot enough to put a gouge in the belt and melt a hole in the cover but never stopped.
I think I'll get the silicone out after your experience.
 

Pricesredcatmt

Active Member
Messages
35
Location
Lafayette
Can and anyone tell me how much this is, and If it would be a good one or the best deal, Thanks just don't want to waste money
 

Attachments

  • Screenshot_20191123-143453.png
    Screenshot_20191123-143453.png
    562.6 KB · Views: 4

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
That's about $100 USD and well worth it.
Use Google to convert from AUD to USD
 

Pricesredcatmt

Active Member
Messages
35
Location
Lafayette
Hey phill I order the belt drive I won't get it till the end of December, but I swaped my gears yesterday, I think they call it A and B and it would not even move, will the belt drive do the same thing with the stock engine
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
On the MT I think you're A and B are 25 teeth and 35 teeth.
Swapping them to 35/25 makes the gearing too tall and will burn the clutch.
The belt drive is 1:1 ratio and will work fine.
 

Pricesredcatmt

Active Member
Messages
35
Location
Lafayette
Yeah as soon as I started it and gave it gas, I was nope lol to big of gear, I order this hope it's the right one
 

Attachments

  • Screenshot_20191201-181402.png
    Screenshot_20191201-181402.png
    216.8 KB · Views: 6

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
Prolly won't make much difference.
The problem you have with the gear swap is the ratio being too high.
It will work with the belt drive though.
I prefer the 6k clutch spring as it makes the car more driveable.
With 8k it's either flat out or not engaged.
 

Pricesredcatmt

Active Member
Messages
35
Location
Lafayette
I talk to onell brothers and they said this would be the best engine , what you think
 

Attachments

  • Screenshot_20191201-191152.png
    Screenshot_20191201-191152.png
    433.4 KB · Views: 7

Dansyco

New Member
Messages
4
To everyones answer about belt drive. get it. You can't go wrong. To any new guys. Follow Steel City RC. I'm pretty anal about following his vids. (thats if you can't tell by looking at my truck). And yes he was off for a while...lol..whats up with that GS...lol. Every video he has has gotten me through all my questions. As for my truck, yes, its a Maverick Black Out. For many of you its HPI duplicate of the Redcat Rampage MT. Stick with the Redcat. For we have named this truck "Cursed". It just is. Any questions i will do my best. But G-Man is the man.

PS...G-Man aka GS. How many items do you recognize...:))
 

Attachments

  • 20191201_210711.jpg
    20191201_210711.jpg
    286.1 KB · Views: 6
  • 20191201_210725.jpg
    20191201_210725.jpg
    325 KB · Views: 6
  • 20191201_210741.jpg
    20191201_210741.jpg
    266.3 KB · Views: 6
  • 20191201_210754.jpg
    20191201_210754.jpg
    297.5 KB · Views: 6
  • 20191201_210802.jpg
    20191201_210802.jpg
    298.3 KB · Views: 6
  • 20191201_210847.jpg
    20191201_210847.jpg
    226.2 KB · Views: 6

Dansyco

New Member
Messages
4
PSS. My other two babies. The LST is my pride. But the Losi SRR is getting there. LST is now an electric. No more Nitro :(
 

Attachments

  • 20180528_121243_resized.jpg
    20180528_121243_resized.jpg
    325.5 KB · Views: 3
  • 20191201_210815.jpg
    20191201_210815.jpg
    251.8 KB · Views: 3
  • 20191201_210820.jpg
    20191201_210820.jpg
    255.9 KB · Views: 3

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
I talk to onell brothers and they said this would be the best engine , what you think

I run a stock Zenoah G290 with a Walbro 668 carby and a Jetpro exhaust.
The more HP you have the more drive train bits you're gonna break.
If you're only getting 15 mph I'd be looking at your tuning and getting a decent pipe.
If you're still running the stock carby get a Walbro.
The quality of the stockers is poor to say the least.
Gman is great to follow.
We often talk via this forum.
He has an MT and a DR so he will have a lot of advice for you.
He also swears by the belt drive and Jetpro.
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
I run a stock Zenoah G290 with a Walbro 668 carby and a Jetpro exhaust.
The more HP you have the more drive train bits you're gonna break.
If you're only getting 15 mph I'd be looking at your tuning and getting a decent pipe.
If you're still running the stock carby get a Walbro.
The quality of the stockers is poor to say the least.
Gman is great to follow.
We often talk via this forum.
He has an MT and a DR so he will have a lot of advice for you.
He also swears by the belt drive and Jetpro.
BTW Redcat is made by HSP.
If you can't find parts under Redcat search under HSP.
Same part numbers and usually cheaper.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Members online

No members online now.
Top