• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

Maverick Blackout belt drive system

Ironman123

Member
Messages
12
Hi does anyone know where I can buy the belt drive system from for my maverick blackout v2 any help would be much appreciated
 

Ironman123

Member
Messages
12
Hi yes the problem I’ve got is the exhaust side is a lot bigger then the exhaust side too big to hose clamp it and doesn’t work if you put the smaller rubber hose inside the bigger one
 

Attachments

  • B8D71644-DE33-4DCF-849D-34F800BD9F59.jpeg
    B8D71644-DE33-4DCF-849D-34F800BD9F59.jpeg
    81.8 KB · Views: 18

Ironman123

Member
Messages
12
Guys is your manifold the same size as the other part of your cpi exhaust the end where you connect them both
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
Do you mean the header is a different diameter to the pipe?
If so you may have to contact the seller.
You may have the wrong header.
 

Simo

Member
Messages
12
Location
Finland
Are belt drives still available somewhere? Stripped metal gears from my MT and was looking at replacing the gears with belt drive. However, seems they are selling "out-of-stock" everywhere :(
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
Thanks, I will do that. I already emailed a while ago, but in English.

Unfortunately you won't get a reply until you send it in German.
Make sure you specify Redcat as his other belt drives are made for 10mm shafts and ours are 8mm.
 

Phill

Well-Known Member
Messages
2,453
Location
The Rock QLD Au
No the carbon fighter has 10mm shafts and Redcat are 8mm.
You might have to contact the seller about the Redcat one.

I got mine from him.
He only speaks German so you'll need to use google translate.
 

RampageCrazy26cc

Senior Member
Messages
258
Location
,VA
No the carbon fighter has 10mm shafts and Redcat are 8mm.
You might have to contact the seller about the Redcat one.

I got mine from him.
He only speaks German so you'll need to use google translate.

when you get it. dose it come just with the pullys and gears or dose it come with the gear plate to?
 

Simo

Member
Messages
12
Location
Finland
As an update, I never got any answer from Stern CNC, not even into email written in German. Ended up replacing the metal gears with new ones (35 euros shipped from China).
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Members online

No members online now.
Top