camo
Senior Member
- Messages
- 194
- Location
- Houston, TX
Can you guys tell me how do I calculate the final gear ratio with the 4 step spur gears of the XT, I have an idea but im not sure how accurate it is 
-
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
4 set spur gears
- Thread starter camo
- Start date
-
- Tags
- gears rampage xb
Obeast44
Banned
- Messages
- 2,223
- Location
- Munfordville Kentucky
The A/B gears are one step in the reduction, then the c/d gears are another step. Even though they (the C/D gears)technically are 1:1 ratio because of the same tooth count. Then you have the center ring and crown gear which is either a 10/30 gear count or its 11/33. I can't remember exactly, all I know is its a 3:1 ratio. The front/rear diffs are 10/30 or 11/33 too, I just cant remember which is which. LOL
To summarize: Take your A/B ratio times your C/D ratio times Center ratio 3.0 times the F/R diff ratio 3.0.
An example is:
29/31x25/25x10/30x11/33= FDR ( final drive ratio )
29/31=.9354 25/25=1 10/30=3 11/33=3
.9354x1x3x3= 8.4186
Keep in mind my math could be wrong...I just woke up! LOL
To summarize: Take your A/B ratio times your C/D ratio times Center ratio 3.0 times the F/R diff ratio 3.0.
An example is:
29/31x25/25x10/30x11/33= FDR ( final drive ratio )
29/31=.9354 25/25=1 10/30=3 11/33=3
.9354x1x3x3= 8.4186
Keep in mind my math could be wrong...I just woke up! LOL
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.
