wheels

So ive been looking forma new set of wheels. Are there any onnthe market thats the same size of the stock ones and in aluminium? Or anything similar. I wamma stay big because thats why i bought a monster truck.... Thanks

After checking the price of the MT tires and wheels thought it best to ask if they are going to fit on the Dunerunner. If so now I know why the MT is $100 more expensive. But looks to me they both share enough other parts, so why not other than increased strain on the drive line?

Installed the Racing Rampage XB Tuned pipe I have to say I much prefer it over the stock, also Just Adjusted my old Duratrax THunder Quake wheels to fit on my chimera, I like the width much better. Just had to dremel out the inside of the wheel a tab bit for them to fit and they ran pretty...

As you all know the wheels on the Rampage XT, MT or MT Pro are pretty big and pretty heavy. They also cause a lot of shake at speed when they're out of balance. I bought a Dubro balancer a few weeks ago, but it proved to be pretty useless for the big rampage wheels. The openings in the wheels...

not sure if this is the right section but I'm wondering if the rear wheel hubs from an HPI baja ss or SC would fit on the MT V3 hate to buy the Vertigos if I don't have to,I've already got a few hpi sets that I swapped out for the extended versions thanks again

Hey guys, I just got my Dubro balancer today. I saw a demo of it on a youtube video and it looks to be a pretty effective balancer for props or wheels. Here's the problem. The aluminum cones that lock in the wheel to the shaft to complete the balance are too small to get a lock on the...

I recently took apart my engine because it was making weird noises. I put it all back together and it does not want to start. I was thinking it had something to do with the flywheel. I did the gap thing to about a business card gap. Does the flywheel have to be installed a specific way?Like...

Hpi outlaw wheels, new never used, start to install one but changed my mind, hpi sand paddles (2), silver back lipped outer beadlocks new, plus green bealocks new never used outer only and gray used lock, Sold to rcdad 48 only Thanks

Hey guys, I am in need of 1 wheel, I shattered a stock wheel and really just need a wheel. If you have tires still glued on the wheel, thats fine too. Just don't want to spend $50 for a replacement as you have to buy 2 and the tires! Thanks and feel free to email me for quicker response...

I was looking through some older threads and found some pictures of the MCD Cheetah wheels and tires, and they look incredible. But, I am unable to find them anywhere. Anyone have any idea where I might be able to find these bad boys? From what I read they are around the same size as MT wheels...

Which wheels and tires can i put on my XT? I want to keep the monster truck look tho Not sure but do the FG monster wheels fit? thanks

I drove my MT for the first time today and I am in love. I wish I had more space to run. Anyway, I am looking to purchase 24 mm hubs to run any wheels that will work on the baja. What wheels do you guys recommend that are smaller and weigh less. I'm trying to get this thing to turn better...

Just wanted to say thanks @rcdad. Ordered the wheels two days before adapters. But look what came first. It's nothing like good service!!! Thanks again.

I picked up a batch of RAMTech Baja adapters for the Chimera. I'll have them up on the site shortly. I threw a set on my sons Chimera and mounted a set of 5ive wheels-n-tires. They look better on the Chimera than they did on the 5ive. LOL

Just got them today and WOW! Because they're so wide, I was worried about the front left tire clearing my DDM pipe. But once on, I have a good 1/2" clearance at the closest point... PHEW!! Picture camparison to 5T tires (7.5" tall). Also picked up a Killer RC wire pull starter.

Just finished this project, fun mod! with the dual front servos the responsiveness is ridiculous! very sensitive, holycrap! all the way down on the rate, otherwise very hard to control, BUT quick! super short vid demos action. 7075rc casters and oversized spindles on the rear with old...

I have the HPI baja adapters and 2 sets of wheels/tires. One set is a knobby 7.5"x2.75" and the other is an all terrian 6.75"x3.125" and fronts are about 2.5". I run the smaller set with my xsc body, but the other set I only run because they came with the truck. I'd like a larger wheel/tire...

I have a set of these on my 1/8 scale truck but I want to order a set for my Chimera, What wheel adapters could you guys recommend for these wheels? http://www.aliexpress.com/item/1-5-FG-Rear-Spike-Wheels-Tires-for-rc-monster-truck-Payment-Terms-L-C-T/475042622.html I want a set of these...

I have been reading forums and folks argue about hubs all that drama just confuses me.... I upgraded my engine on my XT and now I'm destroying tires rampage tires..... Having fun doing it, I'm looking at proline wheels and tires . No desire to glue myself... I see hpi or baja stuff I want the...

Went out and got my Plastic Dip to water proof my servos. WHile in was in the store I thought about the sharp wheels on my 1/8 scale trucks and I'm just curious. Is anyone here running aluminum wheels on their chimera? Or what type of custom wheel are you using.