servo

Savox 0235 vs Savox 0236 for steering, which one would you guy's prefer for steering on Rampage MT?

I know this has been covered in the past but I am new to 1/5 scale and was wondering if the Hitec HS-5765MH was still the best steering servo to put in the MT or is there another servo better suited for this truck? Also what throttle brake servo would you all recommend? Thanks in advance for...

Hey all. I had upgraded the stock servos to a single servo. I put a Hitec HS-5805MG in and it works pretty well. (I have the Futaba metal servo mount.) Not too unhappy especially since I don't need 2 servos. But, turning lock to lock while not moving doesn't seem to be possible. I want a...

Red cat offers servo replacement at a warranty cost of 30 plus 5.00 for shipping if you send the old one in for them to see if you are eligable to receive one at warranty cost. But I didnt spend a lot of time with my truck before the left steering servo gave out and wondering if I get a new one...

Would you guys recommend 2 servo Turnigy 1270HV or 1 servo Savox 0235 ? It''s for Rampage MT.....

Was wondering what is a better choice than the stock servos in the MT ? I thnk the gears are stripped in mine, or can I take apart the servos and upgrade the gears instead??

Hi, I want to upgrade to 2s lipo battery and I want to upgrade the throttle servo that can take 7.4v what servo should I get for direct fit? Thanks

Hello. I just purchased the Hitec HS-5645MG servo for the throttle and brake to replace the original Hexfly junk that quit working. I am wondering if there is a specific procedure for the installation that somebody can recommend? I have read about setting the end points but can not find info on...

Ive had several Rampage MTs but have a weird issue on this one. The steering trim adjustment on the remote is outta whack. If I turn it full left the wheels turn left but if I turn the trim knob full right it only straightens the wheels out

hi there, i was wondering how do people use only 1 servo in there rampage? is it possible? how to mod it? thanks

I picked up a rampage gas buggy and need to put in a steering servo. What aftermarket servos work with enough power? I am staying with one servo and just want it to turn good without killing the servo. And do the aftermarket servos use the stock servo arm or will I need to buy a separate one?

Anyone familiar with this problem? I was driving and it stopped turning left but would turn right. When I tried turning left, it just flickered and now it does it both when trying to turn left and right

does anybody kno of better steering servos that will fit in my rampage mt pro v3. both of the stock one quit after break in. I'm looking for a direct fit ones so I don't need to drill holes or anything like that. any info would be great and thankyou

If you have a slow servo with big torque, you can make up some speed with a longer arm. With a faster servo, you can gain torque with a shorter arm. My question related to what one is better? Im leaning towards the weaker/faster servo with a shorter arm. Logic? I don't use all the throw in my xbe...

It's there any way to make a non waterproof servo waterproof? Ie put a coat of silicone on it around the screws and break points?

My stock servos lasted maybe 1.5gallons and finally took a crap on me! The throttle servo lasted, not even the first gallon! Im looking at a pair of Hitec HS-755MG for steering. Torque is 200oz @6v. Theyre priced on Amazon around $40 which is great, and Hitec is a reputable brand. Anyone else...

I have an eb-e with a XL2 and a leopard 5692 1090kv 8s set up. It runs on a Spektrum dx2s into a hobbyking orange rx. 6v from the XL2 is fed into the receiver while a castle bec pro feeds 7.5 volts only to a savox 235 and a few fans. When I apply even a moderate amount of throttle, the...

Hello all, I just joined. I need a pair of aluminum servo arms for my Hitec 755MG servos. I bought a Rampage MT used and it came with the 755MG but I discovered one of the plastic horns were stripped. I ordered the Redcat horns not realizing it wouldn't fit, I then ordered a aluminum Hitec 24t...

I have serval problems I just bought 2 new savox servos for my steering in my redcat MT for some reason my steering servo don't work but my throttle servo works fine what is my problem can someone help me???

I have the rampage mt v3 . I'm switching to hitec 805mg servos. I bought the aluminum futaba servo mount, it came with 3 parts . The two end parts for the servo on the right side was easy. What is the 3rd part for and what do you do for the radio box side? Sorry if the answer is already here I...