chassis

http://www.redcatrampageforum.com/showthread.php?t=6758

I added 4mm AL plate and nylon/delrin 1/2 rods to support tower and cage. 3 tanks thru it and still everything is straight. 1.3 pound in added weight. Total weight 29.4 with full tank. XB 24.5 and 3/8 rods

I made some chassis supports for my MT The one that I put on the cutout area of the chassis by the gears really helped alot, the aluminum ones that attach to the shock towers helped alot too. I can't make the chassis or shock towers flex by pushing, pulling or trying to bend the chassis...

Here ya go rob64n i got the bent MT chassis looking good and straight again it will make a good extra :eek:

Can someone confirm how much chassis flex is exhibited on the XB? From what I can tell in Alishmao's (Redcat) videos, there is definitely some flexing going on. Should we be concerned? :confused: TIA

I just finished tearing down my ramp to bare chassis and Im seeing that when chassis is flat on work bench it seems the front part where front diffs sit is bent upwards at a slight angle. Now since this is my first ramp and all Im wondering if this is the way is sopposed to be or its bent. I...

Liking the new look xt/xb but was wondering what the chassis was made of? I like the skirt it has to protect the inners. Is it one piece or v3 metal chassis with a plastic skirt? Any info would be appreciated

Would love to buy a rallye but cant find a supplier here in Australia ? Have seen a couple of suppliers here advertise a vehicle simlar to the onroad redcat rallye. It is HSP brand and is called an onroad rally,it appears to be built on the rampage chassis with onroad suspension BUT has off...

Are there any differences in the chassis between a V1 and V3 vehicle? I assume all mounting is the same, so weight? Stiffness? Strength? Is it worth upgrading if you have a V1 and can get a VERY cheap new chassis ($25 still in box). PS I'll introduce myself as soon as I get my new to me Rampage.

Im looking for a mt or tt rolling chassis any versions message me and let me know what you have??? My paypal is finally setup and ready and im starting a new build.

Well here it goes, On my dune runner chassis sides I plan to glue some sort of mesh on insides. Hopefully this will prevent big dirt from coming to the motor, center diffs, etc. Now I have few choices and would like to get feedback from you guys. 1) Get some metal mesh and tape it with...

Looking for New or slightly used V2 Chassis. Also for new/slightly used HPI air filter with one of those angled mounts. Thanks

has anyone find out how much is the cost yet?

I do this mod on cars I really get into, 1/10, 1/8, 1/5, it works on them all. I got the idea from my first RC car. I was looking for cheap performance when I discovered the Jang Rustler. I cant believe I didnt think of that! I got a few spare Ramp chassis from the Redcat sale so I wasnt afraid...

Ive got an HPI 26cc with 5b clutch housing. Is this a direct drop-in or is the Rampage clutch housing different?

i would pay 100 easily for a CF chassis and towers.. man that thing would be light!! does anyone here work with CF, or know of anyone im gonna try and make my own http://dragonplate.com/ecart/categories.asp?cID=65

Here is what I came up with to stiffen up the chassis. Front/rear and center works with stock roll cage and stock body. No flex left to right on the front or rear and no banana flex at all in the center. Have not made it pretty yet need to do some grinding on it but works relay relay good .Also...

it ain't pretty but it has no flex and I also added a better rear post mine kept snapping screws

anyone here with an easy or affordable upgrade on the rear part of the mt\buggy? rob i hope u can fabricate something like a rear aluminum brace ...

i just bent mine on my 1st run! this is not what i expect to replace right away.it sux! if u have one that ur willing to sell for cheap lmk..thanks