Search results

140.00 shipped

$130

$100.00 shipped Zenoah engine fan cover Fuel cap vents (5) Bartalone engine tool flywheel and clutch holder Hitec servo hardware Redcat transmission gears Dubro fuel filter Redcat part numbers - 07117, 07126, 07451, 25004, 25003, 50066 07133,50075x2, 07174 , 25023, 07454 , Miscellaneous...

It was a bad manifold gasket replaced it problem gone

Yes i had hat clutch spring snap before it wants to roll even at idle but no, i took everything apart and replaced insulator gasket tightened her up and runs perfect , all the screws seemed fine except just one carb bolt was about 1/8 backed out almost nothing but that may have been the...

Running my buggy yesterday and I noticed after the end of the run it started to accelerate by itself and was moving forward very slowly revving High I turned down or reaching the low-speed needle to calm it down but why would it do this? I had to richen up the low end about a quarter of a turn...

Yes before i ran the truck i always set end points....kts not a big deal i still have good steering stopping it riggt before it hits

No the truck is new, if you look at your inner steering link and turn all the way it will hit the diff case on both sides

I received replacement jumpers fro the seller but not even using the spares, i just got one set from my other MT and used one pair on each making it 4v low voltage cutoff which i will never let the tx get that low anyway, fixed he shutting off at 6v i had but he spare are staying in my box...

http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=223065471427&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111 Pm if interested

Im actually satisfied with dynamite at a 1/3 of the price it works flawlessly, i have 2 of them wont spent the extra money on a killer switch when they do exact same thing.....

Just noticed that the low voltage tabs probably shook loose from vibration and got lost. I was wondering why my car was turning off when I turn and it was because these tabs were missing so as soon as it goes under 6 volt it shuts the engine off and my voltage receiver pack is at 6.2 so figured...

I see dubro has a 3/32 filter but don't know if that is corrrect size?

Lookong to get one of these for my car is dubro 340 the right part number? Also which is the right line to install it because he fuel lines are black i cant see whats coming in to the carb? Is it the top or bottom of the carb that the filter should be installed?

https://www.ebay.com/itm/223054238325 Slightly used free shipping

The rag is to avoid further melting of the rollcage ungil the aluminum one comes in. The pieces of velcro you see in the picture are at the only spots the hoses touch the heatsink and that wofks perfect...thanks again

Thanks for the replies, just noticed i may have to get the aluminum rollcage for the MT because the stock plastic cage is touching the side mount pipe, and that melted plastic on the pipe is a #$ch to get off

Link?

I'm wondering this same thing did you ever get your answer? I just called Redcat and they don't even know

My fuel lines are rubbing the head of the engine was thinking of sleeving them with he metal fuel line covers , where can i get some?