• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

Search results

  1. T

    Help!! Connecting my cpi exhaust

    Judging by the pic it looks as though it's supposed to be a tight fit.. I can't say from first hand as I have a jetpro on my xb.
  2. T

    Help!! Connecting my cpi exhaust

    Pictures?
  3. T

    Stock pipe on the chimera give really nice performance and sound...question is...will it last??

    As far as the stock muffler, it is what it is. And yes the jetpro pipe is expensive but it will give you a noticeable improvement. It all boils down to how fast can you afford to go.
  4. T

    Proline badland mx43

    I did the same mod on my xb the only thing I had to modify was the wheel adapters where a little bit tight. I took some emery cloth to the spindles and it fit fine.
  5. T

    6x6

    That is sick! I did a 6x6 using redcat rockslide's but this is better
  6. T

    Rampage MT will not start, please help

    Try checking the compression. If you live in the US you can take it to auto zone and you can test it there with there loan a tool. If you don't have a tester of your own.
  7. T

    Steering Knuckle Bushings

    Are the knuckles stock or after market? If stock you should be able to order them from redcat if there after market you'll have to go to the manufacturer of the part.
  8. T

    Question Related To Amsoil 2 Stroke Engine Oil?

    No 50:1 is for weed trimmers and chain saws. The recommended ratio for a rampage is 20:1 or 25:1 these engines are much higher reving than a chain saw. This engine has more in common with a dirt bike than a chain saw.
  9. T

    Rampage mt5 clutch gone bad

    Really the only adjustment for the clutch is the spring otherwise just make sure you have the shims right so it will engage at the proper rpm.
  10. T

    Does anyone make a aluminum diff gear carrier for the Rampage MT?

    Sounds like your new differential gear is out of round. Rampageshop.com should have aluminum differential carrier, he should also have shim assortment.
  11. T

    Are my steering servos burnt out?

    The stock servos are weak to begin with, and don't last very long judging by how slow they act its time to replace them. There is a website that compares the different servos ( I can't recall the address off hand) that will give you a good comparison of which will work best for you. I personally...
  12. T

    Bigger Xt Wheels without conversion

    What about mtxl wheels they may fit. That's the largest I know of.
  13. T

    Bigger Xt Wheels without conversion

    I don't know about the xt but I use the losi wheel conversion kit on my xb.
  14. T

    CY 29cc engine feedback....

    My xb has the 990 carb on the stock hy 30cc I give it a couple slow pulls to prime the carb and it will start within 2 pulls after priming.
  15. T

    Dynamite kill switch issues

    As I've posted in regards to other posts I recommend the @Killer RC kill switch over the dynamite kill switch. Slightly more expensive but well worth it. As it's more reliable.
  16. T

    My Rampage MT wont start for breakin

    Have you tried using an actual spark tester? It takes more to create a spark under compression than in atmosphere.
  17. T

    36cc gas motor Vs 29cc. Proof other than a sticker.

    As far as the 29cc and the 36cc engine, to find the difference you have to measure the bore and stroke.To find the cylinder volume you take (3.1415 x radius) squared x stroke. This will give you a close calculation of the displacement it won't be exact do the the volume of the dome of the head...
  18. T

    Ramtech or 7075rc wheel adapters???

    I used the grub screws on my xb. I'm not sure about the size I set up a kit of common screw sizes including 2mm, 3mm, 4mm, and 5mm grub screws. So I'm covered on most everything I need.
  19. T

    Was causes header to warp like this? Also crack

    It's aluminum. Save up some money and get either a jetpro or a ddm dominator. Normally around $250 to $300 US but it will out last your rig.
  20. T

    Ramtech or 7075rc wheel adapters???

    I got a set of ram-tech adapters for my xb and found that I had to adjust them to fit. The inside diameter was just a few tenths to small. I don't know about the 7075.as I have not tried them.
Top