• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

Search results

  1. BertR

    Weird engine behavior

    It's been a while since I have been on and this is a fairly old thread but I was wondering if you have put new crank seals in. I had one of my OBR engines do this and ended up being the seals were shot.
  2. BertR

    Custom XB winter project

    Still here..
  3. BertR

    Custom XB winter project

    Oh a new build! I have been away far too long. As always D2S you still got skills..Looks slick!
  4. BertR

    Pull-Start stops working in sand dunes

    It's just dirty and needs washes out and shot with lube.. easy fix
  5. BertR

    zenoah g320rc on redcat rampage mt

    Take off the plastic gear cover and you should be able to see 4 pin holes on the gear on the bell..gear “A" if it has a square block behind the gear you can use the gear sets for the other rigs.
  6. BertR

    zenoah g320rc on redcat rampage mt

    Do you have the 4 pin style or the square?
  7. BertR

    zenoah g320rc on redcat rampage mt

    You can always get gears for the xb/xt..that will help on speed and you should still have power to pull the Mt tires
  8. BertR

    Wheels and tyres

    If you want to open the door to more options you will be wanting to get ram-tech or 7075rc adapters to run the line up that losi and hpi can run.
  9. BertR

    Exhaust screws

    I use these on all my rigs.http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.10702/.f
  10. BertR

    zenoah g320rc on redcat rampage mt

    I keep a bottle of yamalube 2r in my inventory... Thats all I will run in the dirt bike! My RC cars have their own setup.. Yamalube 2r ,castor 927 and redline 2t.. When it comes time to redo the top ends it tells me what's working good and what's not.
  11. BertR

    Rampage mt Gears

    Yes... You will need a 8mm open end on the back and your tool to get the nylock off or it will keep spinning
  12. BertR

    Rampage mt Gears

    Most likely it's the one under the breaks closest to the gear side
  13. BertR

    Rampage mt Gears

    Take gear C off and adjust the set screw on the flat spot.. Or the brake layshaft it also a 2 piece lay shaft and the set screw needs adjusted there. I had that issue before and I believe it was the shaftthat the brakes are on. Hope this helps!
  14. BertR

    Ready to Roll

    You will like the other gear set better! I tried both sets with trenchers and the balance between torque and speed was decent with the 31/29/26/24
  15. BertR

    zenoah g320rc on redcat rampage mt

    You will be fine with that.. Make sure your mix is 20-25:1 for your break in.
  16. BertR

    Cheap $$$ Rampage pipe option

    The first time you flip the truck when that pipe is warmed up it will flatten like a beer can. Save your money and get something made from steel.
  17. BertR

    Sticker removal

    I agree... Goo gone is the best way.. Do not mistake it for (Good Off) that crap will burn the body
  18. BertR

    What has changed with the 32cc

    Can anyone shed some light on the 2 bolt 32cc.. Is it just a head and piston change on the stock run of the mill case or full top to bottom. I know they came out with a 4 bolt but is the case and crank the same as 30.5
  19. BertR

    How bad is it?

    I take my toys to the carwash and hose them down and never had an issue.. If you do just don't swamp the electronics to be safe.
  20. BertR

    WTB WTB used 32cc

    I have one of them in the 5b with their so called ported head and it has the worst 2+mm free port at top dead...you can see from the exhaust straight through the intake lol. I have been wondering if the only thing that has changed with the 32 is a larger bore and piston with the stock case.
Top