Redcat Rampage Forum

Turtle racing clutch housing?

jeffp83 — Mon, 06 Sep 2010 05:56:15 GMT

Was wondering if anybody knew if the turtle racing billet aluminum clutch housing for the baja 5b would work on the stock HY 26CC engine on my Rampage MT V3? I haven't had the engine out to compare them yet. Maybe the Baja uses a different clutch housing but I thought that they used the same engine.

Here's the link to the piece : @ DDM

Thanks, appreciate it as always :D

P2W 9-05 Bash Vids

hamster huey — Mon, 06 Sep 2010 04:29:37 GMT

I got a new youtube account so if you sbuscribed to my old one it doesnt exist anymore. Resubscribe to my new one to see my vids.

Heres P2W. I got a lot of Gopro today but edited 2 quick vids so I dont bore any one. It tops out at 41.5mph I just found out.

Driving on blacktop doing some quick ovals:

You Tube

Off raod back and forth up a hill:

You Tube

34-36mm 2-bolt Headkit

Obeast44 — Mon, 06 Sep 2010 02:31:04 GMT

Im looking for a 34-36mm headkit to slap on a CY bottom end to keep as a spare motor. It will need to be in decent condition with as little use as possible and be designed for use with a 28mm stroke crank.
I will need the jug, the piston w/ring, the pin bearings and the wrist pin. I have everything else needed. Just shoot me a PM or post here. Thanks again for looking.

What do you do for living

DanSpd — Mon, 06 Sep 2010 01:21:34 GMT

Feel free to post what you do for living, etc. I am not ashamed so I will start lol
I am student, own Pacific Coast RC, and do programming such as php,javascript(jquery),C++,C#, etc. Right now I am broke but looking forward in life :D

Added:
Also I build custom computers, servers, office setups, server setups and bit of web-designing.
So if you need help in any of those areas please feel free to PM me about it.

My new wheels, a discontinued model!

grizzledcamudgen — Sun, 05 Sep 2010 22:35:22 GMT

Well, I just picked these up from Bob (LSRC)! Cindy & I met him today at the Weed Wacker Pulls in Earl Park (Fall Festival), it was tons of fun! I'll post some pics or videos of the event after I go thru and edit/splice them together.

I hope you all like the new wheels! :)

Attached Thumbnails

Clutch Bell Shaft!

lightning73 — Sun, 05 Sep 2010 21:47:27 GMT

Im workin on my MT and im havin a hell of a time trying to get the A gear off of the clutch bell shaft, the gear is sitting crooked on the aluminum square which is killing my mesh, and I cant get it off to save my life. Ive beaten the crap out of it with a block of wood and hammer and this ba%$ard wont give...:eek:...Has anyone else had this kind of trouble getting the A gear off the clutch shaft? Is there a certain trick to doing this? Because im about to get mid-evil on it, and im probably gonna end up ruining the shaft in the process...:(

Rampage RTR for sale

forist — Sun, 05 Sep 2010 21:15:09 GMT

I am selling my Rampage I have 2 of them now and only need the one. Here are some of the things on it.
Blue aluminum rear hubs
has stock can in it but will include Pro pipe
Dual steering set up
has one stock servo still works
2000 mAh batt
28cc CY motor it says Fuelle on pull start but CY on the case only 3 tanks ran on it.
Hitec 645 throttle servo
RC4WD 2.4 3ch radio like new
front and rear bracing
shock covers
Solid blue fule lines and Blue in line filter by the carb
k&N air filter with blue outwear and blue velocity stack
centered dog bones
MT gears
Will include MT or TT tire/rims with it your choice MT's are like new the TT's are used
asking 550.00 + shipping paypal only
sold as is
will post pics in a bit

Green Rampage Pic's

dlx3200 — Sun, 05 Sep 2010 17:51:39 GMT

I just got my Rampage a couple of weeks ago and i decided to make it look a little different, anyways just wanted to share some pic's.

"No Limit Of NJ"

lightning73 — Sun, 05 Sep 2010 17:29:28 GMT

Hey guys, just wanted to take a min and let everyone know there will be a "No Limit R/C Of NJ" event taking place on September 12, 2010.

Time: Registration opens at 10:00 AM
Racing starts at 11:00 AM

Place: Zak`s Hobbies
366 Wheat Road
Vineland, NJ

Phone: (856) 697-1300

Cost: $20 for the first vehicle registered per driver.
$10 for each additional vehicle.

Classes: ~ Young Guns/ Novice
~ Electric Monster Truck
~ Nitro Monster Truck
~ Short Course
~ Mixed (Run What You Brung- Any R/C Vehicle At All!)
~ There may also be a long jump competition and possibly even a
steel cage match!

This sounds like it will be a lot of fun! Just figured id post this in case anyone is interested, I know im goin!...lol

Redcat Rampage MT V1

Piranha2 — Sun, 05 Sep 2010 15:49:09 GMT

Redcat Rampage MT V1 $600
Sprint Modded DOM pipe $250
O'Neill Brothers Racing Race-Ported ZENOAH 4-bolt 30.5cc $420
(piston relieved) (ran @ 25:1 oil-fuel)
(ran 3 times after proper 2-tank break-in period)
Futaba 3PM 2.4GHz FASST (3-ch) $160
DDM 4600mAh recv pack $50
Modded kill-switch $40
Hi-Tec HS-5745 MG $80
Hi-Tec HS-645 MG $30
Redcat aluminum gear plate $80
Redcat MT wheels / tires (brand new) $180
Redcat aluminum front steer $30
HPI Baja Desperado / Excavators (used) $140
HPI 24mm hubs $30
Redcat 23cc (complete motor - used) and 28.5cc headkit (needs rebuild)
Redcat MT V1 chassis $90
Rampage upgrade kits $100
HPI heavy duty 6mm shocks $160
RampageHopups springs $40
Redcat metal gears (used) $120
Pullstarter assemblies (2-new) $40
Fast Eddie bearing kit new-almost complete) $50
Misc parts / extras (check pics-minimum) $250

As you can see, easily over $3000 in total.
Asking $999.99 w/ free shipping (2-boxes minimum)
Yeah a grand is alot but when you consider a $400 motor and at least $50 for shipping that means you're getting a TON of stuff for $550 !!! Look at the pics CLOSELY !!! I'm ASKING $999 doesn't mean I won't entertain BEST OFFERS !!!
PAYPAL only
This is your chance to own a proven, reliable and very powerful Rampage MT

Due to the nature of the hobby: NO refunds/NO returns, sold AS-IS
Item listed elsewhere so auction may end at any time

You Tube

Attached Thumbnails

yikes

racetruck — Sun, 05 Sep 2010 03:25:39 GMT

:eek::eek::D:Dit is bad when you have to view the forum from my wii with my 46 inch tv because my son is hogging my computers

fuel tank position /redcat tuned pipe

pilotmotor — Sun, 05 Sep 2010 02:01:47 GMT

in case anyone was wondering i just reversed the fuel tank so the cap is on the pull starter side now. makes it a whole lot easier to fill now with the tuned pipe not blocking the cap. I havent ran it yet but it does seem to fit fine.

Rampage MT RTR

Fabe — Sat, 04 Sep 2010 15:53:57 GMT

Hey everyone, I'm looking for a used Rampage MT for a buddy of mine, preferably RTR. Please post or PM info/pics of what you have.

Thanks!

Can't get the controls right!

grizzledcamudgen — Sat, 04 Sep 2010 12:48:31 GMT

I can't seem to figure out what is wrong but when I turn the tx and rx on, the steering wheel on the tx doesn't work, the throttle (pulled) works the throttle, the brakes (pushed) turns the wheels to the right and puts on the brakes. ???
Not sure what in the world is going on! I have the steering and throttle plugged into the rx right, so, what gives? anyone...? anyone...? :confused:

Futaba 4PK w/604 receiver

Anyone got a pullstarter

smoedog — Sat, 04 Sep 2010 03:12:56 GMT

Anyone got an old pullstarter they aren't using anymore. mine finally took a dump.